Regular Battery Maintenance for Durable Power
Keeping batteries in great condition will help prolong the lifespan of your lithium batteries that come with Maoxiang’s electric stackers. You should avoid deep discharge and overcharging the unit. To do this, unplug the charger when the battery is fully charged, and plug it back in once the power level drops too low. You should also keep the charging port and battery free of water and debris to avoid corrosion and short circuiting. You should also avoid extreme weather, so Maoxiang recommends storing the stackers in temperature controlled, dry conditions. You should cover the exposed battery insulation and connection wires, and replace parts that are worn or damaged. By following these steps, you will help keep the battery's endurance and output to help keep the electric stackers operational for a long time.
Daily pre-operation checks can uncover problems before they turn into big breakdowns. Before operating Maoxiang's electric stacker, inspect the hydraulic system to make sure there are no leaks and that the oil level is good. Check the solid tires to see if there is any wear, cracks, or if they are air pressure (if applicable) to ensure they can move safely. Make sure the safety features (overload protection, brake, and mesh guard) are working. Check the control panel and wiring harness for any loose or damaged connections. These simple checks only take a few minutes to do, but they are very important for maintaining the electric stacker, as they can help avoid unplanned downtimes.
Proper Cleaning to Avoid Damaging Parts
Cleaning is a key part of maintaining your electric stacker that is often neglected. Dust and other debris can build up on and around electric stacker components such as the body, hydraluic system, and battery, which could result in part malfunctions or wear. To clean the stacker, use a soft brush and avoid high-pressure water as the spray could damage the electrical components. Pay extra attention the fork tips and mast rails to ensure debris does not impact lifting ease. Once the stacker is clean, dry it thoroughly, especially the control panel and charging port. The modular design of Maoxiang's electric stacker makes cleaning simple, allowing you to stay on top of maintenance with minimal effort.
Lubricating Moving Parts in a Timely Manner
Lubrication of moving components such as masts, fork hinges, and steering systems is essential, as this will aid in the reduction of wear-and-tear friction. Please use industrial oils of high-grade lubricants from Maoxiang. Lubricants should be applied to mast tracks, chain connectors, and movable joints at a maximum of 500 operation hour intervals, as the user manual sometimes dictates. Over lubrication should be avoided, as oils will attract excess dirt and debris. It is then necessary to remove excess oils after lubrication. Lubrication also facilitates proper functioning of the stacker’s electronic components.
Abiding by Load and Operational Standards
The electric stacker’s long-term stability and the overall operational safety requires adherence to Maoxiang’s operational guidelines and load limit standards. Damage to the electric stacker’s hydraulic system, battery, and frame can result from overloading, so do not adjust the stacker’s load. Components on the stacker will incur increased wear from rough operation such as sudden acceleration, sharp turns, or slamming on the brakes. Use the electric stacker on flat, stable surfaces, and avoid uneven off-road terrain that may strain the chassis. Maoxiang provides guidelines that ensure the correct and safest operational use of the electric stacker. Proper use reduces unnecessary wear and tear, extending the electric stacker's service life.
